Characterisation of poly(neutral red) modified carbon film electrodes; application as a redox mediator for biosensors

The polymer redox mediator, poly(neutral red) (PNR), has been synthesised and characterised electrochemically to investigate the best electropolymerisation and mediation conditions for application in enzyme biosensors and to clarify the mechanism of action. Neutral red was electropolymerised by potential cycling on carbon film electrode substrates by allowing the monomer to be oxidised during the full 20 cycles of polymerisation or reducing the positive limit of the potential window after the first 2 cycles to impede monomer oxidation with a view to obtaining longer polymer chains and a lesser degree of branching. Comparison was made with glassy carbon substrates. The PNR films on carbon film electrodes were characterised using cyclic voltammetry and electrochemical impedance spectroscopy, as well as in glucose biosensors prepared with PNR. Glucose oxidase enzyme was immobilised by encapsulation in silica sol-gel and compared with that obtained by cross-linking with glutaraldehyde. The biosensors were evaluated by chronoamperometry in 0.1 M phosphate buffer saline solution, pH 7.0, and showed evidence of electron transfer between the enzyme cofactor flavin adenine dinucleotide and PNR dissolved in the enzyme layer competing with PNR-mediated electrochemical degradation of H₂O₂ formed during the enzymatic process. This paper is dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.     

Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

Thermodynamic characterization of different actin isoforms

Summary The thermodynamic properties of the cardiac and skeletal a-actin isoforms were studied to characterize the molecular bases of the functional differences between them with the method of differential scanning calorimetry (DSC). The thermal properties of the actin filaments were described in the presence of calcium and magnesium ions as well. Based on the calculated free energy changes the α-cardiac actin filaments appeared to be more stable in its physiologically more relevant, magnesium saturated form. The magnesium saturated form of the α-cardiac actin filaments seemed to be more stable compared to the calcium saturated form of it. The enthalpy and entropy changes could differentiate between the α-cardiac and α-skeletal actin isoforms and between the calcium and magnesium saturated cardiac actin isoforms as well. Our results can demonstrate that the few differences between the amino acid sequences of the α-actin isoforms have an influence on the thermal properties and maybe on the function of these proteins as well.     

Molecular basis for antifreeze activity difference of two insect antifreeze protein isoforms

The insect spruce budworm(Choristoneura fumiferana) produces antifreeze protein(AFP) to assist in the protection of the over-wintering larval stage and contains multiple isoforms. Structures for two isoforms,known as CfAFP-501 and CfAFP-337,show that both possess similar left-handed β-helical structure,although thermal hysteresis activity of the longer isoform CfAFP-501 is three times that of CfAFP-337. The markedly enhanced activity of CfAFP-501 is not proportional to,and cannot be simply accounted for,by the increased ice-binding site resulting from the two extra coils in CfAFP-501. In or-der to investigate the molecular basis for the activity difference and gain better understanding of AFPs in general,we have employed several different computational methods to systematically study the structural properties and ice interactions of the AFPs and their deletion models. In the context of intact AFPs,a majority of the coils in CfAFP-501 has better ice interaction and causes stronger ice lattice disruption than CfAFP-337,strongly suggesting a cooperative or synergistic effect among β-helical coils. The synergistic effect would play a critical role and make significant contributions to the anti-freeze activity β-helical antifreeze proteins. This is the first time that synergistic effect and its implica-tion for antifreeze activity are reported for β-helical antifreeze proteins.     

Detection of banned meat and bone meal in feedstuffs by near-infrared microscopic analysis of the dense sediment fraction

In this paper we present an alternative method for detection of meat and bone meal (MBM) in feedstuffs by near-infrared microscopic (NIRM) analysis of the particles in the sediment fraction (dense fraction (d >1.62) from dichloroethylene) of compound feeds. To apply this method the particles of the sediment fraction are spread on a sample holder and presented to the NIR microscope. By using the pointer of the microscope the infrared beam is focussed on each particle and the NIR spectrum (1112–2500 nm) is collected. This method can be used to detect the presence of MBM at concentrations as low as 0.05% mass fraction. When results from the NIRM method were compared with the classical microscopic method, a coefficient of determination (R²) of 0.87 was obtained. The results of this study demonstrated that this method could be proposed as a complementary tool for the detection of banned MBM in feedstuffs by reinforcement of the monitoring of feeds.     

Do proficiency tests always verify laboratories’ performance? The case of FAPAS PT 0270

In this paper, the case of FAPAS PT 0270 “Doramectin and Oxfendazole in Sheep Liver” is discussed. During evaluation of the data received from participants (determination of total, oxidised oxfendazole residue and calculation of the sum of oxfendazole and oxfendazole sulfone residues), significant differences were observed between the results obtained by use of two analytical approaches. This phenomenon can be explained by the route of oxfendazole metabolism, which results in the presence of fenbendazole in the sample. This was not predicted by the provider; consequently, not all the necessary tests on the material were conducted. Due to the high uncertainty of the z-scores in this test, the results of the PT cannot be used for purposes of evaluation, and the benefits of participation in PT 0270 are questionable.     

Reduced Overlap Population Analysis for Triosmium Clusters

The use of reduced overlap population (ROP) analysis from EHMO calculations as a means to gauge the presence of metal–metal bonds in triosmium clusters is examined. A number of triosmium clusters containing bridging ligands have been used as test cases, including the bis-ethoxy bridged cluster Os₃(μ-OEt)₂(CO)₁₀, 1b, and some of its group 15 derivatives Os₃(μ-OEt)₂(CO)₉(EPh₃), 2. These latter clusters are newly synthesized and have been characterized completely, including by single-crystal X-ray crystallographic studies. In honour of Professor Dieter Fenske on his 65th birthday.     

Preferred orientation in filtercakes of kaolinite

The orientational order parameter of dense colloidal dispersions of plate-like particles as a function of volume fraction is measured using neutron diffraction. This non-invasive experimental approach directly provides the full particle orientation distribution from which the order parameters can be calculated. The orientation parameters are shown to be linked to the solids fractions of the cakes and the macroscopic permeability of the samples. However, this study suggests that, although orientation can be relevant for a given system, other factors can have a stronger influence, for example, the degree of dispersion or colloidal stability of the clay and may be the principle factor that controls permeability. In addition, we report enhanced ordering of these materials under the influence of an external cross-flow field.     

Hydrogen–hydrogen bonding in biphenyl revisited

The evidence for the stabilizing nature of the H–H bonding in planar biphenyl is succinctly reviewed. The stabilizing nature of the H–H bonding is revealed through a comparison of the atomic energy of every atom in planar biphenyl with the same atom in the twisted equilibrium structure. It is shown that the barrier to rotation via the planar transition state is the net resultant of a stabilisation of the four ortho-hydrogen atoms (by 8 kcal/mol each), a stabilisation of the two para-carbon atoms (by 3 kcal/mol each) and by the dominant destabilisation of the two carbon atoms joining the two rings—the two junction carbon atoms—(by 22 kcal/mol each). The energetic stabilisation of the four ortho-hydrogen atoms is further shown to be in large proportion due to the formation of the hydrogen–hydrogen interatomic surface. Furthermore, neither the “bond order” between the two junction carbon atoms nor the total electron delocalisation between the two rings exhibit a significant change in going from the planar to the twisted equilibrium geometry. These findings are in contrast with the classical view of a balance between “steric non-bonded repulsion” and better electron delocalisation as a function of the twist dihedral angle. Similar conclusions have been recently reached by Pacios and Gómez through a study of the electrostatic potential at the position of the hydrogen nuclei. We dedicate this article to Professor TM Krygowski on the occasion of his 70th birthday wishing him a long and productive life.     

Electrochemical investigation of hymecromone at a multi-wall carbon nano-tube/cetyl pyridine bromine composite film electrode

A multi-wall carbon nanotube (MWNT)/cetyl pyridine bromine (CPB) composite film modified glassy carbon electrode (GCE) was developed for the electrochemical determination of hymecromone in phosphonate buffer. Electrochemical behaviour of hymecromone at the composite film electrode was investigated with voltammetry. Compared with an irreversible oxidation of hymecromone at the bare GCE, the oxidation peak current was enhanced greatly at the film electrode. Some parameters such as pH, scan rate, accumulation potential and accumulation time were optimized. Under optimal conditions, an oxidation peak at 0.82 V was employed to determine hymecromone electrochemically. A linearity between the oxidation peak current and the hymecromone concentration was obtained in the range of 3.0 × 10⁻⁷ − 2.0 × 10⁻⁵ mol 1⁻¹ with a detection limit of 8.0 × 10⁻⁸ mol 1⁻¹. The proposed procedure was successfully applied to assay hymecromone in pharmaceutical formulation with satisfactory results. The text was submitted by the authors in English.